DS1238

MicroManager

 概要   技術資料   オーダー情報   関連製品   ユーザのコメント (0)   すべて表示   


ステータス 製品のステータスコードについての説明

全バージョンが製造を中止しています。推奨置換品についてはオーダー情報をご覧ください。

製品概要

The DS1238 MicroManagers are functionally similar to the DS1236 but with pin-compatibility with the MAX691, MAX693, and MAX695 series. Additionally, the DS1238 allows for external timing control. These highly integrated monitors perform the following functions critical to microprocessor-controlled systems:
  • A precision temperature-compensated reference and comparator continuously monitor the system power supply. If Vcc levels breach threshold tolerance, an internal power-fail signal is generated which activates reset. When power returns to tolerance, the DS1238 holds reset for a minimum of 50ms (typically 100ms) while the power supply and processor stabilize. Optional threshold levels are available: the DS1238-5 and DS1238A-5 for resets at ±5% of a 5V supply; and the DS1238-10 and DS1238A-10 for ±10% of a 5V supply.
  • The watchdog timer circuitry monitors software execution. If a strobe input is not driven low prior to user-set timeouts the timer forces a processor reset.
  • The DS1238 enables external override by debouncing the pushbutton input. A minimum active reset pulse width is provided.
  • An on-chip switch directs SRAM power between Vcc or an external battery, whichever is greater. This switched supply can also back up a CMOS microprocessor.
  • To enable write protection upon the detection of a power-fail condition, the chip enable output is held to within 0.3V Vcc or to within 0.7V of battery input.
  • Alternative oscillator control pins provide either external or internal clock timing for both the reset pulse width and the watchdog timeout period.
DS1238 MicroManagers are complete system monitors for SRAM, microprocessor software, and systems power. They provide power-on reset for smooth microprocessor reboots, convert CMOS SRAM to nonvolatile operation, and provide flexible timing controls. The extensive integration of functionality ensures reliable operation in battery-backed, processor-controlled systems while reducing component count, saving power, simplifying board layout, and saving cost and space.
 

データシート

英語 このデータシートをPDF形式でダウンロードするダウンロードする Rev 1 (PDF, 232kB)
  Eメール

主な特長

  • Power fail detect with referenced comparator, NMI:
    • Warns microprocessor of an impending power failure
    • Holds microprocessor in check during power transients
    • Halts and restarts an out-of-control microprocessor
    • Provides orderly shutdown in nonvolatile microprocessor applications
    • Invokes sleep mode
  • Pushbutton reset:
    • Monitors pushbutton for external override
    • Controls external power switch for high-current applications
    • Controls low-power stop mode in battery operated hand-held applications
  • Watchdog timer
  • 5V operation with active high and low resets:
    • ±5% of 5V (DS1238-5, DS1238A-5)
    • ±10% of 5V (DS1238, DS1238A)
  • Battery switch:
    • Converts CMOS SRAM into nonvolatile memory
  • Control pins gate to external power switch for high-current applications
  • CE control:
    • Unconditionally write-protects memory when power supply is out of tolerance
  • Optional freshness mode (DS1238) seals battery until first power-on
  • Consumes less than 200nA of battery current at 25°C
  • Operating ranges:
    • DS1238, DS1238A: 0°C to +70°C
    • DS1238-IND, DS1238A-IND: -40°C to +85°C
  • Pin-for-pin compatibility with MAX691, MAX693, MAX695
  • Optional internal or external timing control
  • UL (Underwriters Laboratories)認定
   
   

DS1238:ファンクションブロックダイアグラム
ファンクションブロックダイアグラム

アプリケーションノート

アプリケーションノート 245   Adding Hysteresis to CPU Supervisor Voltage Sense Inputs Monitoring Upstream Voltage Supplies for Power-Fail Warnings (English only)

製品ガイド

マイクロプロセッサ監視回路 (PDF)

信頼性レポート

信頼性レポート: DS1238.pdf (English only)
UL (Underwriters Laboratories)認定

ソフトウェア/モデル

なし

オーダー情報

フィルタ: 型番 パッケージ: 温度: テープ&リール サンプル
型番 注釈 無料
サンプル
直接購入 (English Only) ステータス 製品のステータスコードについての説明 推奨置換品 パッケージ:
タイプ ピン数 実装面積
図面 コード/バリエーション *
温度範囲 RoHS/鉛フリー
成分分析
DS1238-10   5V-10%モニタ    N/A 入手不可(No Longer Available) DS1238-10+

 
PDIP(N)、16ピン、158.4mm²
図面:21-0043 (PDF)
ランドパターン:
使用パッケージコード/バリエーション:P16-2*
0℃~+70℃ RoHS/鉛フリー:非対応
成分分析
DS1238-10+       N/A 入手不可(No Longer Available)   PDIP、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238-10N       N/A 入手不可(No Longer Available) DS1238-10N+

 
PDIP、

ランドパターン: 提供されていません

-40℃~+85℃ データシートを参照
DS1238-10N+       N/A 入手不可(No Longer Available)   PDIP、

ランドパターン: 提供されていません

-40℃~+85℃ データシートを参照
DS1238-5       N/A 入手不可(No Longer Available) DS1238-5+

 
PDIP、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238-5+       N/A 入手不可(No Longer Available)   PDIP、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238S+T&R       N/A 入手不可(No Longer Available)   SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238S-10       N/A 入手不可(No Longer Available) DS1238S-10+

 
SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238S-10+       N/A 入手不可(No Longer Available)   SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238S-5       N/A 入手不可(No Longer Available) DS1238S-5+

 
SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
型番 注釈 無料
サンプル
直接購入 (English Only) ステータス 製品のステータスコードについての説明 推奨置換品 パッケージ:
タイプ ピン数 実装面積
図面 コード/バリエーション *
温度範囲 RoHS/鉛フリー
成分分析
DS1238S-5+       N/A 入手不可(No Longer Available)   SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238S-5+T&R       N/A 入手不可(No Longer Available)   SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238S-5/T&R       N/A 入手不可(No Longer Available)   SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238S/T&R       N/A 入手不可(No Longer Available) DS1238S+T&R

 
SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照
DS1238S/T&R/       N/A 入手不可(No Longer Available)   SOIC、

ランドパターン: 提供されていません

0℃~+70℃ データシートを参照

注:
  1. 製品購入のための方法およびリンク:http://japan.maxim-ic.com/sales
  2. 必要な情報が見つかりませんか?マキシムのアプリケーションエンジニアに質問してください。通常翌営業日以内に、製品を探すための専門的なお手伝いをします。
  3. 型番サフィックス:TまたはT&R = テープ&リール、+ = RoHS/鉛フリー、# = RoHS/鉛含有(適用除外用途)、-D = ドライパック、DS製品の-U/+U = カットテープ。詳細:フルデータシートまたはマキシム製品の型番の見方を参照。
  4. *パッケージの中にはいくつかのバリエーションがあるものがあり、図面に記載されています。「パッケージコード/バリエーション」は製品が使用しているバリエーションを示しています。型番サフィックスにある「+」、「#」、「-」はRoHSステータスを表わすことに注意してください。パッケージ図面は異なるサフィックス文字を示すことがあります。

類似型番の製品

DS1238A MicroManager


お探しの製品が見つかりませんか?

情報インデックス

概要

 

技術資料

 

オーダー情報

 

関連製品

 
製品概要
主な特長
アプリケーション/用途
主要スペック

注記およびコメント
  データシート
アプリケーションノート
評価キット
製品ガイド
信頼性レポート
ソフトウェア/モデル
  価格および入手性
サンプル
オンライン購入
パッケージ情報
鉛フリー情報
  類似機能製品
類似アプリケーション製品
評価キット
類似型番の製品
併用製品
 
Rev 1; 1999-11-18
このページの最終更新日: 2009-10-26


 


    |         |         |     プライバシーポリシー     |     法的お知らせ
Copyright © 2012 by Maxim Integrated Products