CT1 from Embedded Data Systems, LLC. CT1 – 1-Wire Counter / Timer Module- The CT1 is designed to count and maintain switch closure pulses from dry contact devices, but unlike many 1-Wire counters, the CT1 maintains the last 3 counts with time stamps allowing the rate to be determined with only one read.
D2 from Embedded Data Systems, LLC. D2 – low cost 2 channel digital I/O- The D2 provides two digital input or output channels that can be independently configured.
D2Photo from Embedded Data Systems, LLC. D2Photo – The D2Photo is a low cost means to monitor the current state of florescent and incandescent lighting. The D2Photo supports conditional searches which allows you to efficiently check the state of up to 100 D2Photos in a fraction of the time many other light detectors can be read.
DSP7X4 from Embedded Data Systems, LLC. DSP7X4 - 1-Wire Digital Display - The DSP7x4 is designed to provide a real time highly visible parameter display or numeric information in a 1-Wire network.
EDIOS from Embedded Data Systems, LLC. EDIOS: Automation / SCADA Software - EDIOS is a general purpose SCADA (automation) program designed for Windows. Based on an object oriented design, EDIOS is extremely easy to use, yet provides powerful automation for nearly any task. Using EDIOS, you can automate your data collection and controls in a variety of ways.
ELK-MM443 Magic Module™ from Elk Products, Inc. The ELK-MM443 Magic Module™ is a four analog or digital input, four relay output programmable logic controller (PLC).
Eternity III iButton Lock from UCA, Inc. Stand Alone intelligent iButton lock set that can fit on any existing door lock with minimum installation.
GP1 from Embedded Data Systems, LLC. GP1- 1-Wire Counter- The GP1 Counter is designed to count and maintain switch closure pulse outputs from dry contact devices such as relays and magnetic reed switches. A battery backed 32-bit counter which can be read but cannot be reset accumulates the pulse count. The GP1 Counter provides the necessary switch excitation voltage so that no external power source is required.
M1Gold & M1EZ8 Controls from Elk Products, Inc. ELK Products offers a diverse range of systems and modules for iButton access control solutions to control one or multiple door systems. 10
OW-TEMP from Embedded Data Systems, LLC. OW-TEMP- EDS manufactures a variety of enclosures for the DS18B20 and DS18S20 temperature sensors including:
• Waterproof Probes
• Foil Tape
• Wall Mount Enclosures
T1SS from Embedded Data Systems, LLC. T1SS- 1 Channel I/O Module 1-Wire Expansion Card -The T1SS I/O module expansion card provides a single socketed interface channel for industrial standard miniature I/O modules to a 1-Wire bus. These modules can accommodate AC voltages as high as 280 Volts and currents up to 3 Amps. DC voltages from 4 to 200 volts and currents up to 3 amps. Dry contact relay output modules such as the Grayhill 70M-ODC5R can also be accommodated. All these industrial standard modules provide 4000 Vac isolation.
T2SS from Embedded Data Systems, LLC. T2SS 2 Channel I/O Module 1-Wire Expansion Card- The T2SS I/O module expansion card provides dual socketed interface channels for industrial standard miniature I/O modules to a 1-Wire bus. These modules can accommodate AC voltages as high as 280 Volts and currents up to 3 Amps. DC voltages from 4 to 200 volts and currents up to 3 amps. Dry contact relay output modules such as the Grayhill 70M-ODC5R can also be accommodated. All these industrial standard modules provide 4000 VAC isolation.
