The MAX6511/MAX6512/MAX6513 are fully integrated, remote temperature switches that use an external P-N junction (typically a diode-connected transistor) as the sensing element to measure the remote temperature. These devices assert a logic signal when the temperature crosses a factory-programmed threshold. Available trip thresholds are from +45°C to +125°C in 10°C increments. Accuracy is within ±3°C (TA = -5°C to +55°C) or ±5°C (TA = -40°C to +85°C). Hysteresis is pin selectable to 5°C or 10°C.
The MAX6511 has an active-low CMOS output and the MAX6513 has an active-high CMOS output. The MAX6512 has an open-drain output. The output is asserted when the temperature exceeds the threshold value. The active-low open-drain output is intended to interface with a microprocessor (µP) reset or interrupt input. The active-high CMOS output can directly drive a power FET to control a cooling fan.
The MAX6511/MAX6512/MAX6513 operate from a
+3.0V to +5.5V supply and typically consume 400µA of
supply current. They are available in the small 6-pin
SOT23. The MAX6513 is also available in a 6-pin leadfree
TDFN package.
主な特長
アプリケーション/用途
Continuously Measure External Junction
Temperature
Factory-Programmed Temperature Threshold from
+45°C to +125°C in 10°C Increments
Insensitive to Series Parasitic Resistance
Active-Low CMOS Output (MAX6511) or Open-Drain
Output for Overtemperature Alarm (MAX6512) or
Active-High Output (MAX6513) for Direct Fan Control
<100ms Response Time
Accuracy
±3°C (TREMOTE = +45°C to
+125°C, TA = -5°C to +55°C)
±5°C (TREMOTE = +45°C to
+125°C, TA= -40°C to +85°C)
ダウンロードする
