ENGLISH 简体中文 日本語 한국어  



   
 
キーワードまたは型番を入力    



DS1306
シリアルアラーム付き、リアルタイムクロック


  クイックビュー     技術資料     オーダー情報     その他の情報     ユーザのコメント (0)     すべて表示  
ステータス
型番 ステータス
DS1306 入手可能:生産中ですが、このファミリのいくつかのバージョンは製造を中止しています。オーダー情報をご覧ください。

データシート
フルデータシート (PDF, 388kB)
英語 このデータシートをPDF形式でダウンロードするダウンロードする

製品概要
The DS1306 serial alarm real-time clock (RTC) provides a full binary coded decimal (BCD) clock calendar that is accessed by a simple serial interface. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. In addition, 96 bytes of NV RAM are provided for data storage.

An interface logic-power supply input pin (VCCIF) allows the DS1306 to drive SDO and 32kHz pins to a level that is compatible with the interface logic. This allows an easy interface to 3V logic in mixed supply systems. The DS1306 offers dual-power supplies as well as a battery-input pin. The dual-power supplies support a programmable trickle charge circuit that allows a rechargeable energy source (such as a super cap or rechargeable battery) to be used for a backup supply. The VBAT pin allows the device to be backed up by a non-rechargeable battery. The DS1306 is fully operational from 2.0V to 5.5V.

Two programmable time-of-day alarms are provided by the DS1306. Each alarm can generate an interrupt on a programmable combination of seconds, minutes, hours, and day. "Don't care" states can be inserted into one or more fields if it is desired for them to be ignored for the alarm condition. A 1Hz and a 32kHz clock output are also available.

The DS1306 supports a direct interface to SPI™ serial data ports or standard 3-wire interface. An easy-to use address and data format is implemented in which data transfers can occur 1-byte at a time or in multiple-byte Burst Mode®.

主な特長
  • Real-time clock counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap-year compensation valid up to 2100
  • 96-byte nonvolatile RAM for data storage
  • Two time-of-day alarms—programmable on combination of seconds, minutes, hours, and day of the week
  • 1Hz and 32.768kHz clock outputs
  • Serial interface supports Motorola serial peripheral interface (SPI) serial data ports or standard 3-wire interface
  • Burst mode for reading/writing successive addresses in clock/RAM
  • Dual-power supply pins for primary and backup power supplies
  • Optional trickle-charge output to backup supply
  • 2.0V to 5.5V operation
  • Optional industrial temperature range
    • -40°C to +85°C
  • Available in space-efficient 20-pin TSSOP package
  • UL® (Underwriters Laboratories)認定

Key Specifications:  Timekeeping & Real-Time Clocks
Part Number Date/ Time Format Interface VSUPPLY
(V)
Time Keeping Current
(nA)
CL
(pF)
Memory Type Memory Size
(Bytes)
Time of Day Alarms Price
hh = sec/100 typ See Notes
DS1306  YY-MM-DD/ HH:MM:SS
3-Wire
SPI
2
3
3.3
5
450 6 NV SRAM 96 2 $1.84 @1k
全Timekeeping & Real-Time Clocks (80)

DS1306:標準動作回路
標準動作回路

アプリケーションノート
  • Application Note 58: Crystal Considerations with Dallas Real-Time Clocks (RTCs) - DS1306 (English only)
  • Application Note 502: Interfacing SPI Real-Time Clocks (RTCs) with a Microcontroller - DS1306 (English only)
  • Application Note 504: Design Considerations for Dallas Semiconductor Real-Time Clocks - DS1306 (English only)
  • アプリケーションノート505:リチウムコインセルバッテリ:アプリケーション寿命の予測 - DS1306
  • Application Note 701: Using the DS32kHz with Dallas Real-Time Clocks - DS1306 (English only)
  • Application Note 2361: Interfacing an SPI-Interface RTC with a PIC Microcontroller - DS1306 (English only)
  • Application Note 2833: Interfacing an SPI RTC with a Motorola DSP - DS1306 (English only)
  • アプリケーションノート3510:DS1305 RTCと8051互換マイクロコントローラとのインタフェース接続 - DS1306
  • Application Note 3816: Selecting a Backup Source for Real-Time Clocks - DS1306 (English only)

    デザインガイド
  • リアルタイムクロック (PDF)

    信頼性レポート
  • 信頼性レポート: DS1306.pdf (English only)
  • UL® (Underwriters Laboratories)認定

    ソフトウェア/モデル
    なし

    オーダー情報
    注:

    1. 製品購入のための方法およびリンク:http://japan.maxim-ic.com/sales
    2. 必要な情報が見つかりませんか?マキシムのアプリケーションエンジニアに質問してください。通常翌営業日以内に、製品を探すための専門的なお手伝いをします。
    3. 型番サフィックス:TまたはT&R = テープ&リール、 + = RoHS/鉛フリー、# = RoHS/鉛免除。詳細:フルデータシートまたはマキシム製品の型番の見方を参照。
    4. *パッケージの中にはいくつかのバリエーションがあるものがあり、図面に記載されています。「パッケージコード/バリエーション」は製品が使用しているバリエーションを示しています。型番サフィックスにある「+」、「#」、「-」はRoHSステータスを表わすことに注意してください。パッケージ図面は異なるサフィックス文字を示すことがあります。


    デバイス: 1-13 / 13

    DS1306 無料
    サンプル
    直接購入 (English Only) ステータス 推奨置換品
    パッケージ: タイプ ピン数 実装面積
      図面コード/バリエーション *
    温度範囲 RoHS/鉛フリー
    成分分析
    DS1306    
    入手可能
    PDIP(N)、16ピン、158.4mm²
    図面: 21-0043 (PDF)
    ランドパターン: Not Applicable
    使用パッケージコード/バリエーション:P16-2*
    0℃~+70℃ RoHS/鉛フリー:非対応
    成分分析
    DS1306+  
    入手可能
    PDIP(N)、16ピン、158.4mm²
    図面: 21-0043 (PDF)
    ランドパターン: Not Applicable
    使用パッケージコード/バリエーション:P16+1*
    0℃~+70℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1306N    
    入手可能
    PDIP(N)、16ピン、158.4mm²
    図面: 21-0043 (PDF)
    ランドパターン: Not Applicable
    使用パッケージコード/バリエーション:P16-2*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析
    DS1306N+    
    入手可能
    PDIP(N)、16ピン、158.4mm²
    図面: 21-0043 (PDF)
    ランドパターン: Not Applicable
    使用パッケージコード/バリエーション:P16+1*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1306E/T&R     N/A 製造中止 DS1306E+
    TSSOP、20ピン、45.2mm²
    図面: 21-0066 (PDF)
    ランドパターン: 90-0116 (PDF)
    使用パッケージコード/バリエーション:U20-1*
    0℃~+70℃ RoHS/鉛フリー:非対応
    成分分析
    DS1306EN     N/A 製造中止 DS1306EN+
    TSSOP、20ピン、45.2mm²
    図面: 21-0066 (PDF)
    ランドパターン: 90-0116 (PDF)
    使用パッケージコード/バリエーション:U20-1*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析
    DS1306EN/T&R     N/A 製造中止 DS1306EN+
    TSSOP、20ピン、45.2mm²
    図面: 21-0066 (PDF)
    ランドパターン: 90-0116 (PDF)
    使用パッケージコード/バリエーション:U20-1*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析
    DS1306EN/T&R/C04     N/A 製造中止 DS1306EN+


    ランドパターン: 提供されていません

    -40℃~+85℃ データシートを参照
    DS1306E    
    入手可能
    TSSOP、20ピン、45.2mm²
    図面: 21-0066 (PDF)
    ランドパターン: 90-0116 (PDF)
    使用パッケージコード/バリエーション:U20-1*
    0℃~+70℃ RoHS/鉛フリー:非対応
    成分分析
    DS1306E+  
    入手可能
    TSSOP、20ピン、45.2mm²
    図面: 21-0066 (PDF)
    ランドパターン: 90-0116 (PDF)
    使用パッケージコード/バリエーション:U20+3*
    0℃~+70℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1306E+T&R    
    入手可能
    TSSOP、20ピン、45.2mm²
    図面: 21-0066 (PDF)
    ランドパターン: 90-0116 (PDF)
    使用パッケージコード/バリエーション:U20+3*
    0℃~+70℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1306EN+    
    入手可能
    TSSOP、20ピン、45.2mm²
    図面: 21-0066 (PDF)
    ランドパターン: 90-0116 (PDF)
    使用パッケージコード/バリエーション:U20+1*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1306EN+T&R    
    入手可能
    TSSOP、20ピン、45.2mm²
    図面: 21-0066 (PDF)
    ランドパターン: 90-0116 (PDF)
    使用パッケージコード/バリエーション:U20+1*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析

    その他の情報
  • RTCの計算
  • スーパーキャパシタの計算

    関連製品
    DS1302 トリクルチャージタイムキーピングチップ
    DS1305 シリアルアラーム付き、リアルタイムクロック
    MAX6902 SPI対応RTC、TDFNパッケージ
    MAX6901 3線式シリアルRTC、TDFNパッケージ
    DS1390, DS1391, DS1392, DS1393, DS1394 トリクルチャージャ付き、低電圧SPI/3線式RTC

    類似製品:同様の製品の製品ファミリを見る

    お探しの製品が見つかりませんか?
  • アプリケーションエンジニアによる製品選択サポート(翌営業日中に回答)
  • パラメトリック検索
  • アプリケーションヘルプ
  •  クイックビュー   技術資料   オーダー情報   その他の情報  
     製品概要 
     主な特長 
     アプリケーション/用途 
     主要スペック 
      

     データシート 
     アプリケーションノート 
     デザインガイド 
     エンジニアリングジャーナル 
     信頼性レポート 
     ソフトウェア/モデル 
     評価キット 

     価格および入手性 
     サンプル 
     オンライン購入 
     パッケージ情報 
     鉛フリー情報 

     関連製品 
     注記およびコメント 
     評価キット 

    2005-07-18
    このページの最終更新日: 2009-05-04


            •         •         •     プライバシーポリシー     •     法的お知らせ

        Copyright © 2009 by Maxim Integrated Products