ENGLISH 简体中文 日本語 한국어  



   
 
キーワードまたは型番を入力    



DS1556, DS1556P
1M、不揮発性、Y2K対応タイムキーピングRAM


  クイックビュー     技術資料     オーダー情報     その他の情報     ユーザのコメント (0)     すべて表示  
データシート
フルデータシート (PDF, 388kB)
英語 このデータシートをPDF形式でダウンロードするダウンロードする

製品概要
The DS1556 is a full-function, year-2000-compliant (Y2KC), real-time clock/calendar (RTC) with an RTC alarm, watchdog timer, power-on reset, battery monitor, and 128k x 8 nonvolatile static RAM. User access to all registers within the DS1556 is accomplished with a byte-wide interface as shown in Figure 1. The RTC registers contain century, year, month, date, day, hours, minutes, and seconds data in 24-hour BCD format. Corrections for day of month and leap year are made automatically.

The RTC registers are double-buffered into an internal and external set. The user has direct access to the external set. Clock/calendar updates to the external set of registers can be disabled and enabled to allow the user to access static data. Assuming the internal oscillator is turned on, the internal set of registers is continuously updated, which occurs regardless of external registers settings to guarantee that accurate RTC information is always maintained.

The DS1556 has interrupt (active-low IRQ/FT) and reset (active-low RST) outputs which can be used to control CPU activity. The active-low IRQ/FT interrupt output can be used to generate an external interrupt when the RTC register values match user programmed alarm values. The interrupt is always available while the device is powered from the system supply and can be programmed to occur when in the battery-backed state to serve as a system wake-up. Either the active-low IRQ/FT or active-low RST outputs can also be used as a CPU watchdog timer, CPU activity is monitored and an interrupt or reset output will be activated if the correct activity is not detected within programmed limits. The DS1556 power-on reset can be used to detect a system power down or failure and hold the CPU in a safe reset state until normal power returns and stabilizes; the active-low RST output is used for this function.

The DS1556 also contains its own power-fail circuitry, which automatically deselects the device when the VCC supply enters an out of tolerance condition. This feature provides a high degree of data security during unpredictable system operation brought on by low VCC levels.

主な特長
  • Integrated NV SRAM, Real-Time Clock (RTC), Crystal, Power-Fail Control Circuit, and Lithium Energy Source
  • Clock Registers are Accessed Identically to the Static RAM; These Registers Reside in the 16 Top RAM Locations
  • Century Byte Register (i.e., Y2K Compliant)
  • Totally Nonvolatile with Over 10 Years of Operation in the Absence of Power
  • Precision Power-On Reset
  • Programmable Watchdog Timer and RTC Alarm
  • BCD-Coded Year, Month, Date, Day, Hours, Minutes, and seconds with Automatic Leap- Year Compensation Valid Up to the Year 2100
  • Battery Voltage-Level Indicator Flag
  • Power-Fail Write Protection Allows for ±10% VCC Power-Supply Tolerance
  • Lithium Energy Source is Electrically Disconnected to Retain Freshness Until Power is Applied for the First Time
  • Also Available in Industrial Temperature Range: -40°C to +85°C
  • UL® (Underwriters Laboratories)認定

Key Specifications:   Timekeeping & Real-Time Clocks
Part Number Functions Date/ Time Format (hh = sec/100) Interface Supply Voltage (V) Memory Type Memory Size (Bytes) Number of Time of Day Alarms Price**
DS1556 
Watchdog Timekeeper
YYYY-MM-DD/ HH:MM:SS Bytewide 3.3
5
NV SRAM 128K 1 $15.75 @ 1k
See All Timekeeping & Real-Time Clocks (85)
Notes:
**This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

DS1556、DS1556P:ブロックダイアグラム
ブロックダイアグラム

アプリケーションノート
  • Application Note 504: Design Considerations for Dallas Semiconductor Real-Time Clocks - DS1556 (English only)
  • Application Note 507: PowerCap Package Allows for Density Upgrades, Surface Mount Assembly - DS1556, DS1556 (English only)
  • Application Note 520: Using a Watchdog Timekeeping RAM with a Microcontroller - DS1556 (English only)

    評価キット
    なし

    デザインガイド
  • リアルタイムクロック (PDF)

    信頼性レポート
  • 信頼性レポート: DS1556.pdf DS1556P.pdf (English only)
  • UL® (Underwriters Laboratories)認定

    ソフトウェア/モデル
    なし

    オーダー情報
    注:

    1. 製品購入のための方法およびリンク:http://japan.maxim-ic.com/sales
    2. 必要な情報が見つかりませんか?マキシムのアプリケーションエンジニアに質問してください。通常翌営業日以内に、製品を探すための専門的なお手伝いをします。
    3. 型番サフィックス:TまたはT&R = テープ&リール、 + = RoHS/鉛フリー、# = RoHS/鉛免除。詳細:フルデータシートまたはマキシム製品の型番の見方を参照。
    4. *パッケージの中にはいくつかのバリエーションがあるものがあり、図面に記載されています。「パッケージコード/バリエーション」は製品が使用しているバリエーションを示しています。型番サフィックスにある「+」、「#」、「-」はRoHSステータスを表わすことに注意してください。パッケージ図面は異なるサフィックス文字を示すことがあります。


    デバイス: 1-16 / 16

    DS1556 無料
    サンプル
    直接購入 (English Only)
    パッケージ: タイプ ピン数 実装面積
      図面コード/バリエーション *
    温度範囲 RoHS/鉛フリー
    成分分析
    DS1556-70    
    EDIP、32ピン、707mm²
    図面: 21-0245 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:MDF32-1*
    0℃~+70℃ RoHS/鉛フリー:非対応
    成分分析
    DS1556W-120  
    EDIP、32ピン、707mm²
    図面: 21-0245 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:MDF32-1*
    0℃~+70℃ RoHS/鉛フリー:非対応
    成分分析
    DS1556-70+  
    EDIP、32ピン、707mm²
    図面: 21-0245 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:MDF32+1*
    0℃~+70℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1556W-120+  
    EDIP、32ピン、707mm²
    図面: 21-0245 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:MDF32+1*
    0℃~+70℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1556-70IND    
    EDIP、32ピン、707mm²
    図面: 21-0245 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:MDF32-1*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析
    DS1556W-120IND    
    EDIP、32ピン、707mm²
    図面: 21-0245 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:MDF32-1*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析
    DS1556-70IND+    
    EDIP、32ピン、707mm²
    図面: 21-0245 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:MDF32+1*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1556W-120IND+    
    EDIP、32ピン、707mm²
    図面: 21-0245 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:MDF32+1*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1556WP-120    
    PCAP、34ピン、597mm²
    図面: 21-0246 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:PC2-6*
    0℃~+70℃ RoHS/鉛フリー:非対応
    成分分析
    DS1556WP-120+  
    PCAP、34ピン、597mm²
    図面: 21-0246 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:PC2+6*
    0℃~+70℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1556WP-120IND+    
    PCAP、34ピン、597mm²
    図面: 21-0246 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:PC2+6*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1556WP-120IND    
    PCAP、34ピン、597mm²
    図面: 21-0246 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:PC2-6*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析
    DS1556P 無料
    サンプル
    直接購入 (English Only)
    パッケージ: タイプ ピン数 実装面積
      図面コード/バリエーション *
    温度範囲 RoHS/鉛フリー
    成分分析
    DS1556P-70+  
    PCAP、34ピン、597mm²
    図面: 21-0246 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:PC2+6*
    0℃~+70℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1556P-70IND+    
    PCAP、34ピン、597mm²
    図面: 21-0246 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:PC2+6*
    -40℃~+85℃ RoHS/鉛フリー:鉛フリー
    成分分析
    DS1556P-70  
    PCAP、34ピン、597mm²
    図面: 21-0246 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:PC2-6*
    0℃~+70℃ RoHS/鉛フリー:非対応
    成分分析
    DS1556P-70IND    
    PCAP、34ピン、597mm²
    図面: 21-0246 (PDF)
    ランドパターン: 提供されていません
    使用パッケージコード/バリエーション:PC2-6*
    -40℃~+85℃ RoHS/鉛フリー:非対応
    成分分析

    その他の情報
  • リアルタイムクロックのデザインガイド (PDF)
  • その他のウォッチドッグクロック

    関連製品
    DS9034PCX 水晶付きPowerCap

    お探しの製品が見つかりませんか?
  • アプリケーションエンジニアによる製品選択サポート(翌営業日中に回答)
  • パラメトリック検索
  • アプリケーションヘルプ
  •  クイックビュー   技術資料   オーダー情報   その他の情報  
     製品概要 
     主な特長 
     アプリケーション/用途 
     主要スペック 
      

     データシート 
     アプリケーションノート 
     デザインガイド 
     エンジニアリングジャーナル 
     信頼性レポート 
     ソフトウェア/モデル 
     評価キット 

     価格および入手性 
     サンプル 
     オンライン購入 
     パッケージ情報 
     鉛フリー情報 

     関連製品 
     注記およびコメント 
     評価キット 

    2005-07-15
    このページの最終更新日: 2009-05-05


            •         •         •     プライバシーポリシー     •     法的お知らせ

        Copyright © 2009 by Maxim Integrated Products