The DS1670 portable system controller is a circuit
that incorporates many of the functions necessary for
low-power portable products integrated into one chip.
The device provides a real-time clock (RTC), NV
RAM controller, microprocessor monitor, and a
3-channel, 8-bit analog-to-digital converter (ADC).
Communication with the DS1670 is established
through a simple 3-wire interface.
The RTC provides seconds, minutes, hours, day,
date, month, and year information with leap year
compensation. The RTC also provides an alarm
interrupt. This interrupt works when the DS1670 is
powered by the system power supply or when in
battery-backup operation, so the alarm can be used to
wake up a system that is powered down.
Automatic backup and write protection of an external
SRAM is provided through the VCCO, active-low CEOL, and
active-low CEOH pins. The backup energy source used to power
the RTC is also used to retain RAM data in the
absence of VCC through the VCCO pin. The chip-enable outputs to RAM (active-low CEOL and active-low CEOH) are
controlled during power transients to prevent data
corruption.
主な特長
Provides Real-Time Clock
Counts Seconds, Minutes, Hours, Date of the
Month, Month, Day of the Week, and Year
with Leap Year Compensation Valid Up to
2100
Power-Control Circuitry Supports System
Power-On from Day/Time Alarm
Microprocessor Monitor
Halts Microprocessor During Power Fail
Automatically Restarts Microprocessor after
Power Failure
Monitors Pushbutton for External Override
Halts and Resets an Out-of-Control
Microprocessor
NV RAM Control
Automatic Battery Backup and Write Protection
to External SRAM
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
ダウンロードする