ENGLISH 简体中文 日本語 한국어  



   
 
キーワードまたは型番を入力    



DS1982U, DS1985U, DS1986U
UniqueWare iButton


  クイックビュー     技術資料     オーダー情報     その他の情報     ユーザのコメント (0)     すべて表示  
ステータス
型番 ステータス
DS1982U この製品は現在生産しておりません。
DS1985U この製品は現在生産しておりません。
DS1986U この製品は新規設計用に推奨されていません。

製品概要
フルデータシート (PDF, 25kB)
英語 このデータシートをPDF形式でダウンロードするダウンロードする
UniqueWare™ iButtons® are factory programmed versions of the DS1982 (1024-bit), the DS1985 (16kbit) and the DS1986 (64kbit) Add-Only iButtons, respectively. They differ from the regular devices in their custom ROM family codes (see ordering information) and the UniqueWare identifier 5E7 in place of the upper 12 bits of the standard serialization field. For technical details on the devices please refer to the DS1982, DS1985 and DS1986 data sheets.

UniqueWare add-only iButtons are only available preprogrammed with customer-specific and write-protected data. UniqueWare data fills at least one but no more than the first four pages of a device, depending on the length of the customer-supplied data. This leaves up to three (DS1982U), 63 (DS1985U) or 255 (DS1986U) memory pages available for programming in the application.

For more details on UniqueWare and how to set up data files, please refer to the UniqueWare project setup manual, available as application note 99 from Dallas Semiconductor. The UniqueWare project setup software is available from the Dallas Semiconductor FTP site at http://files.dalsemi.com/auto_id, file name 'unwsetup.exe'.

主な特長
  • 1024 bits, 16kbits or 64kbits electrically programmable read only memory (EPROM) communicates with the economy of one signal plus ground
  • Unique, factory lasered and tested 64-bit registration number (8-bit family code, 36-bit serialization, 12-bit UniqueWare identifier 5E7H, 8-bit CRC tester) assures absolute traceability because no two parts are alike
  • EPROM partitioned into 256-bit pages for randomly accessing packetized data records
  • Each memory page can be permanently write-protected to prevent tampering
  • Device is an 'add only' memory where additional data can be programmed into EPROM without disturbing existing data
  • Reduces control, address, data, power and programming signals to a single pin
  • 8-bit family code specifies device communications requirements to reader
  • Presence detector acknowledges when reader first applies voltage
  • Reads over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C

お探しの製品が見つかりませんか?
  • アプリケーションエンジニアによる製品選択サポート(翌営業日中に回答)
  • パラメトリック検索
  • アプリケーションヘルプ
  •  クイックビュー   技術資料   オーダー情報   その他の情報  
     製品概要 
     主な特長 
     アプリケーション/用途 
     主要スペック 
     図 

     データシート 
     アプリケーションノート 
     デザインガイド 
     エンジニアリングジャーナル 
     信頼性レポート 
     ソフトウェア/モデル 
     評価キット 

     価格および入手性 
     サンプル 
     オンライン購入 
     パッケージ情報 
     鉛フリー情報 

     関連製品 
     注記およびコメント 
     評価キット 

    2000-01-07
    このページの最終更新日: 2007-06-21


            •         •         •     プライバシーポリシー     •     法的お知らせ

        Copyright © 2009 by Maxim Integrated Products