| Application Note 324: T1/E1 Network Interface Design - DS2148, DS2148, DS21Q48 (English only) |
| Application Note 351: T1/E1 and T3/E3 Transformer Selection Guide - DS2148, DS21Q48 (English only) |
| Application Note 370: Using RCLK in a BITS/SSU Application - DS2148 (English only) |
| Application Note 382: J1 Japanese Standards - DS2148, DS21Q48 (English only) |
| Application Note 387: Using DS2148/348 as Repeater - DS2148 (English only) |
| Application Note 388: Hitless Protection Switching with 1+1 Redundancy - DS2148 (English only) |
| Application Note 402: Additional Pulse Amplitude Settings for DS2148, DS21348, DS21Q48, DS21Q348 and DS21448 - DS2148, DS21Q48 (English only) |
| Application Note 405: Power-Fault Protection Layout - DS2148, DS2148, DS21Q48 (English only) |
| Application Note 407: DS2148/DS21348 Hardware Mode - DS2148 (English only) |
| Application Note 590: Maxim® Telecommunications Frequently Asked Questions - DS2148 (English only) |
| Application Note 2706: Bit Error Rate Testing the DS314x Series of DS3/E3 Framers
- DS2148 (English only) |
| アプリケーションノート3556:マイクロコントローラを使用せずにダラスセミコンダクタのLIUを設定 - DS2148 |