ENGLISH 简体中文 日本語 한국어  

DS2715
NiMH Battery Pack Charge Controller

1- to 10-cell NiMH battery-pack charge controller. Regulates current through either linear control or switch-mode control.


  QuickView     Technical Documents     Ordering Info     More Information     User Comments (0)     All  
Data Sheet
FULL DATA SHEET (PDF, 528kB)
Download this datasheet in PDF formatDownload   Send this datasheet to any email addressE-Mail


Description
The DS2715 is well suited for cost-sensitive charger applications where the battery pack is either internal or external to the application. It has been optimized for safe and reliable charging of 1 to 10 NiMH cells in series. The internal gain block can be selected as either a comparator or transconductance amplifier for charge current regulation. This makes the DS2715 configurable as a switched DC charger, a linear current regulator, or a switchmode current source. The DS2715 pre-conditions severely depleted cells before entering full charge mode. It terminates full charge using the dT/dt technique, which requires an external sensing thermistor. Over-temperature, under-temperature, and over-voltage detection prevents charging under unsafe conditions. A user selectable charge timer allows charge rates from 0.167°C to 2°C. FAST-CHARGE, TOPOFF and DONE modes are included for highly reliable, safe charging of NiMH cells. Discharge mode allows the DS2715 to enter a low power sleep state while the cell pack is being discharged.

Key Features   Applications/Uses
  • Charges 1 to 10 NiMH Cells
  • FAST-CHARGE up to a 2°C Rate
  • PRECHARGE and TOPOFF Charge Modes Help Cell Conditioning
  • Load Detection Allows the DS2715 to Enter Low Power Sleep Mode (Less than 10µA) while the Cell Pack is Discharged
  • dT/dt Charge Termination Eliminates Cell Charge Stress
  • Monitors Voltage, Temperature, and Time for Safety and Secondary Termination
  • Regulates Current through Either Linear Control or Switch-Mode Control
  • LED Output Displays Charge State
  • Small 16-Pin SO Package

 
  • Handheld Gaming
  • Handheld POS Terminals
  • Portable DVD Players
  • Portable Television Sets
  • Test Equipment

    Key Specifications:   Battery Chargers
    Part Number Cell Chemistry Number of NiMH or NiCd cells Protected VIN (max) (V) Charging VIN (max) (V) Charge Rate Set by Charge Termination Charge Regulation Features EV-Kit Package Operating Temp. Range (°C) Price**
    DS2715  NiMH 1
    10
    2
    3
    4
    5
    6
    7
    8
    9
    16.5 16.5 Resistor dT/dt Linear
    Switchmode
    Stand Alone
    Thermistor Input
    Timer
    Yes SOIC/16 -20 to +85 $1.80 @ 1k
    See All Battery Chargers (59)
    Notes:
    **This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

    Application Notes
  • Application Note 3607: Charging Batteries from USB - DS2715
  • Application Note 4180: Optimizing the Load-Switch Function of the DS2715 Battery-Charger IC - DS2715
  • Application Note 4214: Estimating Switching Speed for the DS2715 NiMH Battery Charger - DS2715

    Evaluation Kits
    none

    Design Guides
  • Power Management for Battery-Powered Equipment (PDF)

    Reliability Reports
  • Reliability Report: DS2715.pdf

    Software/Models
    none

    Ordering Information
    Notes:

    1. Other options and links for purchasing parts are listed at: http://www.maxim-ic.com/sales.
    2. Didn't Find What You Need? Ask our applications engineers. Expert assistance in finding parts, usually within one business day.
    3. Part number suffixes: T or T&R = tape and reel; + = RoHS/lead-free; # = RoHS/lead-exempt. More: SeeFull Data Sheet or Part Naming Conventions.
    4. * Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.


    Devices: 1-4 of 4

    DS2715 Free
    Sample
    Buy
    Package: TYPE PINS FOOTPRINT
      DRAWING CODE/VAR *
    Temp RoHS/Lead-Free?
    Materials Analysis
    DS2715KLINEAR  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS2715KSWITCH  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS2715Z+  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis
    DS2715Z+T&R  
    SOIC;16 pin;
    Dwg: 21-0041 (PDF)
    Use pkgcode/variation: S16+1*
    -40°C to +85°C RoHS/Lead-Free: Lead Free
    Materials Analysis

    More Information
  • New Product Press Release 2005-05-27 

    Didn't Find What You Need?
  • Next Day Product Selection Assistance from Applications Engineers
  • Parametric Search
  • Applications Help
  •  QuickView   Technical Documents   Ordering Info   More Information  
     Description 
     Key Features 
     Applications/Uses 
     Key Specifications 
     Diagram 

     Data Sheet 
     Application Notes 
     Design Guides 
     Engineering Journals 
     Reliability Reports 
     Software/Models 
     Evaluation Kits 

     Price and Availability 
     Samples 
     Buy Online 
     Package Information 
     Lead-Free Information 

     Related Products 
     Notes and Comments 
     Evaluation Kits 

    2006-05-17
    This page last modified: 2008-01-15



          Privacy Policy    Legal Notices

          Copyright © 2008 by Maxim Integrated Products, Dallas Semiconductor