The MAX8822 drives up to four white light-emitting diodes (LEDs) with regulated constant current for display backlighting in cell phones, digital cameras, PDAs, and other handheld devices. By utilizing a proprietary negative 0.5x inverting charge pump and innovative independent low-dropout (LDO) adaptive current regulators, very high efficiency is achieved over the full 1-cell Li+ battery voltage range, even with large LED VF mismatch. The 1MHz fixed-frequency switching allows for tiny external components. The regulation scheme is optimized to ensure low EMI and low input ripple. Two 200mA, low-noise, high power-supply-rejection-ratio (PSRR) LDOs with programmable output voltages are included on-chip to provide power to camera modules or other devices.
The MAX8822 features a single-wire, serial-pulse control-logic interface that programs LED current and the output voltages of the LDOs. The LED dimming range is pseudo-logarithmic from 24mA to 0.1mA in 31 steps. LDO output voltages are programmable in 16 different combinations to meet various camera module requirements.
The MAX8822 includes soft-start, thermal shutdown, open- and short-circuit protection.
Key Features
Applications/Uses
High-Efficiency Charge Pump for Up to Four White LEDs
Independent Adaptive Voltage Supply for Each LED
24mA to 0.1mA Dimming Range
1% (typ) Current Accuracy and 0.3% Current Matching
Low 65µA (typ) Quiescent Current
Dual 200mA Low-Noise, High PSRR LDOs
16 Different Output Voltage Combinations Up to 3.3V
High 60dB PSRR at 10kHz
Flexible Single-Wire Control for Dimming and LDO Output Voltage
Low 0.5µA (typ) Shutdown Mode
Soft-Start Limits Inrush Current
Thermal Shutdown and Open- and Short-Circuit Protection
Tiny 16-Pin, 3mm x 3mm Thin QFN Package (0.8mm max Height) with Exposed Paddle
Notes: **This pricing is BUDGETARY, for comparing similar parts. Prices are in
U.S. dollars and subject to change. Quantity pricing may vary
substantially and international prices may differ due to local
duties, taxes, fees, and exchange rates. For volume-specific prices
and delivery, please see the price and availability page
or contact an authorized distributor.
* Some packages have variations, listed on the drawing. "PkgCode/Variation" tells which variation the product uses. Note that "+", "#", "-" in the part number suffix describes RoHS status. Package drawings may show a different suffix character.
Devices:
1-2
of
2
MAX8822
Free Sample
Buy
Package:
TYPE PINS FOOTPRINT
DRAWING CODE/VAR *
Temp
RoHS/Lead-Free? Materials Analysis
MAX8822ETE+
THIN QFN;16 pin;
Dwg: 21-0136 (PDF)
Use pkgcode/variation: T1633+5*
MAX1848 White LED Step-Up Converter in SOT23 MAX1582 High-Efficiency Step-Up Converters for White LED Main and Subdisplay Backlighting MAX1573 White LED 1x/1.5x Charge Pump in UCSP and Thin QFN MAX1575 White LED 1x/1.5x Charge Pump for Main and Sub-Displays MAX1574 180mA, 1x/2x, White LED Charge Pump in 3mm x 3mm TDFN MAX1576 480mA White LED 1x/1.5x/2x Charge Pump for Backlighting and Camera Flash MAX1561, MAX1599 High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs MAX1578, MAX1579 Complete Bias and White LED Power Supplies for Small TFT Displays MAX8595X, MAX8596X High-Efficiency, 36V Step-Up Converters with TA Derating Option for 2 to 9 White LEDs
Download
E-Mail
